Avaya CallPilot 202i, Руководство пользователя, Страница: 53 / 92

Component Start, stop? Courtesy
stop?
Diagnostic
s
available?
Replaceable?
Motherboard Yes No Yes Yes (IPE server)
Media Bus Yes No Yes No
Time Switch No No No No
DSPs Yes No Yes No
Multimedia channels Yes Yes Yes No
Call channels Yes Yes No No
DS30X link Yes No No No
Viewing component states
View the state of a component to determine the general condition of the component, including
whether the component is disabled or off duty. The state of a component appears in the
Maintenance section of the Maintenance page.
Component states
You can determine the state of a component by looking at the State box in the Maintenance
section.
State Description
Active The component is working and currently involved in processing a
call.
Disabled The diagnostic failed.
Idle The component is working but not currently involved in processing
a call.
InTest A diagnostic is running on the resource or device.
Loading The component started, which takes it out of the Off Duty state.
This state occurs quickly and is immediately followed by Idle.
No resources The hardware required for the component to operate is not installed
or is not operating properly.
Not Configured The device is not configured in CallPilot.
Viewing component states
Avaya CallPilot 202i Server Maintenance and Diagnostics December 2010 53