Avaya CallPilot 202i, Руководство пользователя, Страница: 37 / 92

Flag Description
/all Displays full configuration information.
/release Releases the IP address for the specified adapter.
/renew Renews the IP address for the specified adapter.
To run the ipconfig command from the operating system
1. Click Start, Programs, Accessories, Command Prompt to display the command
prompt window.
The Command Prompt window appears.
2. At the prompt, type ipconfig <with appropriate parameters>.
Example: ipconfig /all
3. Press Enter.
The system runs the ipconfig utility.
4. Type Exit to close the Command Prompt window.
The ping command
The ping command sends an echo request to a specified host. Use this command to verify
network connectivity to the remote device.
Ping command syntax
The ping command uses the following syntax:
ping [-t] [-a] [-n count] [-l size] [-f] [-i TTL] [-v TOS] [-r count]
[-s count] [[-j host-list] | [-k host-list]] [-w timeout]
destination-list
Parameter Description
-t Pings the specified host until interrupted.
-a Resolves addresses to host names.
-n count Specifies the number of echo requests to send.
-l size Sends buffer size.
-f Set Don't Fragment flag in packet.
The ping command
Avaya CallPilot 202i Server Maintenance and Diagnostics December 2010 37