Avaya CallPilot 201i, Установка оборудования, Страница: 26 / 134

Supported peripheral devices
CD-ROM drive (NTRH9037)
An external CD-ROM drive is used to install and upgrade the server. The drive connects to the
server with an intermediate SCSI cable that connects to the SCSI connector on the faceplate.
Because the CD-ROM drive is an external device, it requires an AC power source.
Set the SCSI ID for the CD-ROM drive to 3. If you are connecting more than one SCSI device to
the server (such as a tape drive), you must daisy chain those devices.
Note:
The CD-ROM drive is not hot-pluggable. You must power off the server to connect or
disconnect the drive.
Tape drive (NTRH9038)
An external SCSI tape drive is used to back up and restore data. The device connects to the
server by an intermediate SCSI cable that connects to the SCSI connector on the faceplate.
Since the tape drive is an external device, it requires an AC power source.
Set the SCSI ID for the tape drive to 5. If you are connecting more than one SCSI device to
the server (such as a CD-ROM drive), you must daisy chain those devices.
Note:
The tape drive is not hot-pluggable. You must power off the server to connect or disconnect
the drive.
Modem
An external modem provides remote access to the 201i server. The modem connects to the
RS-232 COM1 connector on the multi I/O cable.
Since the modem is an external device, it requires its own AC power source.
About the 201i server
26 Avaya CallPilot
®
201i Server Hardware Installation December 2010