Avaya CallPilot 1006r, Установка оборудования, Страница: 19 / 46

and media gateway can be point-to-point (or through the LAN), if the system is installed in a
distributed data network.
For information about the CS 1000 system and i2004 Internet phone set bandwidth and
network requirements, refer to the Communication Server for Enterprise 1000 Planning and
Installation Guide (553-3023-210).
Switch connectivity
For more details about how the 1006r server and switch connection is established, refer to the
Installation and Configuration Task List (NN44200-306).
CallPilot ELAN subnet and Avaya server subnet setup
The 1006r server provides 10/100/1000Base-T Ethernet connectivity through NICs installed
in the server. The function of the NIC varies based on switch connectivity, as follows:
Meridian 1 or Avaya Communication Server 1000 systems
• One NIC provides connectivity to the ELAN subnet. Connect the NIC labeled NIC 2 on
the back of the server to the ELAN subnet.
For information about the purpose and requirements of the ELAN subnet, see the
Planning and Engineering Guide (NN44200-200).
• The second NIC, labeled NIC 1 can be connected to the Avaya server subnet.
This optional NIC is required only for Meridian 1 or CS 1000 systems that require a Avaya
server subnet connection (in addition to the ELAN subnet connection). The Avaya server
subnet provides data connectivity between desktop and Web messaging clients, Web-
enabled administrative PCs, and the CallPilot server.
Network requirements
Appropriate networking equipment must be available for both the Avaya server subnet and
ELAN subnet.
Switch connectivity
Avaya CallPilot® 1006r Server Hardware Installation December 2010 19