Avaya callpilot 1002rp, Техническое обслуживание и диагностика

Страница: 43 / 150

Flag Requirement Description
table for a description of the
available subtests.
/L:loops Optional Specifies the number of times
(up to a maximum of 65 535) to
execute the requested test.
The default number of tests is
1. A value of 0 infinitely loops
until you enter Ctrl+C.
TSTSERIO internal loopback diagnostic subtests
The following internal loopback subtests are available for the TSTSERIO command. For each
of these tests, the communications resource must be available.
Table 11: TSTSERIO internal loopback subtests
Subtest name Description
idata Internal data bus loopback
imsr Internal modem status register
baud Internal data bus loopback at various baud rates
word Test 5-, 6-, 7-, and 8-bit data lengths
stop Test 1, 1.5, and 2 stop bits
pari Test odd/even parity
fifo Test that device can operate in fifo mode
To invoke the TSTSERIO /P command from Windows
1. Click Start → Programs → Accessories → Command Prompt.
Result: The Command Prompt window appears.
2. At the Command prompt, type tstserio with the required parameters, and then press
Enter.
For example, type TSTSERIO /P com1 or TSTSERIO /P com 2, and then press
Enter.
3. Type Exit, and then press Enter to exit the Command Prompt window.
TSTSERIO internal loopback diagnostic subtests
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics December 2010 43