manualshive.com logo in svg

Avaya Cajun P580, Руководство пользователя, Страница: 91 / 770

Поделиться
Скачать
Avaya Cajun P580 Скачать руководство пользователя страница 91

Document No. 650-100-700, Issue 1

2-41

Setting Up the Switch

—

TFTP Server — To copy a file stored on a TFTP server to your 
running or startup configuration or to a file on the switch.

* Note:  If you select File or TFTP Server, you must also 

provide the path and filename of the source file in the 
Destination Filename field.

3.  Select one of the following from the Copy Destination

pull-down menu. 

—

Running-Config — Copies your startup configuration, or other 
file located on the switch or on a TFTP server, to your running 
configuration.

—

Startup-Config — Copies your running configuration, or other 
file located on the switch or on a TFTP server, to your startup 
configuration.

—

File — Copies your startup or running configuration, another 
file located on the switch, or a file located on a TFTP server to a 
file on the switch.

—

TFTP Server — Copies your startup or running configuration, 
or another file located on the switch, to a location on a TFTP 
server.

* Note:  If you select File or TFTP Server, you must also 

provide the path and filename of the destination file in 
the Source Destination field.

4.  Enter the IP address of the source or destination TFTP server in the TFTP 

Server IP Address field, if applicable.

5.  Click Copy. The source configuration or file is copied to your specified 

destination.

* Note:  The Web Agent returns an 

Invalid operation!

 error message if you 

attempt to copy one of the following:

•

The current running configuration to the running 
configuration.

•

The startup configuration to the same startup configuration.

•

The specified TFTP server to a TFTP server.

Содержание Cajun P580



































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов