Avaya Cajun P580 Скачать руководство пользователя страница 712

Страница: 712 / 770

25-52

User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0

Chapter 25

Resetting the QoS Statistics

Use the reset port queue counters to reset the queue statistics to 0. The
syntax of the command is:

reset port queue counters {<mod-num> | <mod-swport-range>} [...,

{<mod-num> | <mod-swport-range>}] {ingress | egress | all} [queue
<queue>]

Table 25-32. Keywords, Arguments, and Options

Keyword, Argument or
Option

Definition

<mod-num>

The slot number of a module. If you specify
<mod-num>, the switch resets the the QoS
statistics for all ports on the module that you
specify.

<mod-swport-range>

The slot number of a module, and, either a
port number, or a range of port numbers
having the format Px-Py. For example:

• To specify port 1 on the module in slot

3, enter 3/1.

• To specify ports 1 through 5 on the

module in slot 3, enter 3/1-5.

If you specify <mod-swport-range>, the
switch resets the QoS statistics for the port or
range of ports that you specify.

{ingress | egress | all}

The direction of traffic that you want to reset
the QoS statistics for.

• Enter ingress to view the QoS statistics

for ingress queues.

• Enter egress to view the QoS statistics

for egress queues.

• Enter all to view the QoS statistics for

both ingress and egress queues.

<queue>

The queue number, which can range from 0 to
7. If you do not specify a queue number, the
switch resets the QoS statistics for all queues
on the port.

Содержание Cajun P580



































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Cajun P580

Отзывы:

Avaya Cajun P580, Руководство пользователя, Страница: 712 / 770

Результаты поиска

Содержание Cajun P580

Отзывы: