Avaya Cajun P580, Руководство пользователя, Страница: 460 / 770

15-10 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 15
Table 15-3. OSPF Interface Dialog Box Parameters
Parameter Definition
Select Select the OSPF interface to be modified.
Interface Displays IP interface (VLAN) that has OSPF enabled.
Note:
This is a read-only field.
IP Address Displays IP address associated with the OSPF interface.
Note:
This is a read-only field.
Area Enter the area ID configured for this interface. The default
is 0.0.0.0.
DR Priority Enter the decimal value for this interface for DR priority
functionality. The value range is 0-255. The default is 1.
Transmit Delay Enter the estimated time (seconds) it takes to transmit a link
state update packet over this interface.The value range is 1-
3600. The default is 1.
Retransmit
Interval Enter the time (seconds) between link-state advertisement
retransmissions, for adjacencies belonging to this interface.
This value is also used when retransmitting database
description and link-state request packets. The value range
is 1-3600. The default is 5.
Hello Interval Enter the time (seconds) between the Hello packets that the
router sends on the interface. This value must be the same
for all routers attached to a common network. The value
range is
1-65535. The default is 10.
Dead Interval Enter the time (seconds) that a router's Hello packets have
not been seen before it's neighbors declare the router down.
This should be some multiple of the Hello interval. This
value must be the same for all routers attached to a common
network. The value range is 1-65535. The default is 40.
Poll Interval Enter the larger time interval (seconds) between the Hello
packets sent to an inactive non-broadcast multiaccess
neighbor. he value range is 1-65535. The default is 120.
Cost Enter the cost metric associated with this interface. The
value range is 1-65535. The default is 1.
Authentication Select the type of authentication available for use on a
given OSPF interface. Authentication types are:
• None (default)
• Simple Password
• MD5 Authentication
Key Enter the authorization key value for the interface.
1 of 2