Avaya 4524GT, Руководство по настройке

Страница: 105 / 362

ACLI Help
To obtain help on the navigation and use of the Command Line Interface (ACLI), use the
following command:
help {commands | modes}
Use
help commands
to obtain information about the commands available in ACLI organized
by command mode. A short explanation of each command is also included.
Use
help modes
to obtain information about the command modes available and ACLI
commands used to access them.
These commands are available in any command mode.
Configuring AUR
This section describes ACLI commands used in AUR configuration.
show stack auto-unit-replacement command
The
show stack auto-unit-replacement
command displays the current AUR
settings.
The syntax for this command is
show stack auto-unit-replacement
The
show stack auto-unit replacement
command is in all command modes.
No parameters or variables are available for the
show stack auto-unit replacement
command.
stack auto-unit-replacement enable command
The
stack auto-unit-replacement enable
command enables AUR on the switch.
The syntax for this command is
stack auto-unit-replacement enable
ACLI Help
Configuration — System April 2011 105