Avaya 3740, Руководство пользователя

Страница: 54 / 151

54
Avaya 374x DECT Telephones - User Guide 02/2016
Calling
Incoming call
The flashing LED, accompanied by a ring signal and/or a vibrating handset, gives a notice of a
call. Ring signal and vibrator can be disabled, see
Sound and Alert Settings on page 90.
The calling party’s handset number or name is shown. The name is shown if the calling party’s
handset number is stored in the local phonebook.
NOTE: If the parameter Stimuli call phonebook lookup is disabled, the system-provided call
information is used instead. This means that if a calling party’s name is saved in the phonebook, it will
not be displayed. This function is only applicable in legacy systems (stimuli).
Answering a call
When the signal sounds, press to answer the call, or press to answer the call in
loudspeaking mode
1
. The name or number of the calling party is displayed if calling line
information is available.
Tip:
Tip:
When a headset is connected to the handset, the headset button can be used to
answer the call. I
A call may also be answered in the following ways:
●
Automatically and Loudspeaking: When Automatically is enabled, all incoming calls are
connected automatically. See Settings on page 46.
●
With a predefined message. This lets the use decline the call, but still acknowledge its
receipt, by sending a predefined text message to the caller. See
Answering a Text
Message with a Predefined Message on page 114.
Declining a call
Your telephone rings.
1. Press On-hook key to decline the call.
Note:
Note:
A priority call cannot be declined.
1. When Bluetooth is enabled, the loudspeaker audio is lowered due to current limitations in the intrinsically safe handset.