CHAPTER 5
Instructions, use and maintenance manual
D r a g o P 1 P L U S
Page 67
5.10. DISMANTLING AND WASTE DISPOSAL
CAUTION!
Decommissioning and dismantling operations must be entrusted to personnel specialised in such
activities. In particular, only those in charge of the dismantling and final waste disposal phase can
perform the following activities:
• mechanical and electrical disconnection of parts according to disassembly instructions and
design diagrams.
• transporting parts from the plant to the waste disposal facility for separation of parts.
The following operations as well as indications in the manuals of the equipment, machines, partly-completed
machinery and components used, supplied by AVANZINI BRUCIATORI s.r.l. as an integral part of the instruction
manual, must be taken into consideration for decommissioning.
The machine essentially consists of the following materials:
•
painted, plasticised or galvanised ferritic steel;
•
stainless steel series 300/400;
•
plastic polyethylene material;
•
elastomers, PTFE, graphite;
•
electric cables with relative gaiters;
• electronic control and actuation devices.
• etc.
IMPORTANT!
The machine does not contain components or hazardous substances which require special
removal procedures.
The person in charge of dismantling and waste disposal operates on the whole machine only and exclusively
when removing and disposing of the machinery at the end of its life.
