7
Step 3:
Turn on Bluetooth on your Bluetooth enabled device. Find & select “Avantree AS9S” to pair and connect.
The next time
, you would like to use your headphones this way you will need to select “Avantree AS9S” on your
Bluetooth enabled device to reconnect.
Add a 2
nd
pair of Bluetooth headphones
NOTE
: Since Oasis Plus doesn't support dual-link aptX HD, we suggest that you switch to "LL" position to get
more stable connections during dual link.
Step 1
: Turn on transmitter and AS9S headphones.
Step 2
: Enter the transmitter into PAIRING MODE manually – press and hold
for 2 seconds, “TX” LED will start
flashing
GREEN
and WHITE alternately.
AUX
OPT
SBC
APTX
RX
TX
A
B
LL
HD
AUX
VOICE
OPT
Hold for 2s
Step 3: Place your 2
nd
set of headphones into Bluetooth PAIRING MODE (Please refer to your 2
nd
headphone’s
user manual).
Step 4: Keep the devices close to each other and wait. Once connected. You will hear voice prompt “Connected.
Ready for use.” Once succeeded, you will find LEDs A and B to both be lit.
For Next Use, please turn on AS9S headphone first, both headphones will auto reconnect to the transmitter
once turned on. If turn on AS9S later, please press once to reconnect.
Charging headphones
Please charge the headphone if you hear the “ low battery” voice prompt. You may charge using a phone
charger (5V/500mA-2A output,) a PC USB port, a TV USB port, or any other USB outlet using the USB cable
provided in the box.
It takes about 3.5 hours to fully charge the headphone. The LED will turn
RED
while charging and will turn off
automatically once the charging is complete.
