2
LED indication & voice prompts
1) LED indicators of the transmitter (Oasis Plus)
Status
LEDs indication
Pairing
LED “TX” flashes alternating
GREEN
and WHITE
Connected with AS9S
LED “A” is on
Connected with 2
nd
headphones
LED “B” is on
Reconnecting
LED “TX” flashes WHITE once per second
2) LED Indictors & voice prompts of headphones (AS9S)
Status
Status
Voice prompt
Power on
BLUE
LED is on for 1 second
Welcome to Avantree
Power off
RED
LED is on for 2 seconds, then turn off
Good bye
Pairing
RED
and
BLUE
LED flashes alternately
Pairing
Connected with Oasis Plus
BLUE
LED on
Connected
Reconnecting
BLUE
LED flashes once per 2 seconds
NA
Charging/Charging
completed
RED
LED on/off
NA
Low battery
RED
LED flashes
Low battery
Turn on HT5009
1) Powering up the transmitter
Power up the transmitter with the USB cable provided. Connect it to a TV USB port (TV needs to be turned
on) or any other USB charger that supports 5V/500mA-2A.
2) Turn on both devices
Turn on the transmitter – Slide Mode switch to “TX” position, the “TX” LED will start flashing WHITE.
