4
Turn on & connect HT41899
Powering up transmitter
Connect the transmitter to a power source. The power source can be either a TV USB port
(TV must be ON to provide power) or any 5V/500mA-2A rated USB charger (e.g. your
phone charger should work).
Turn on the transmitter and the headphones
Turn on the transmitter
- Slide ON/OFF switch to ON, all LED indicator lights up for 2 seconds.
Turn on BOTH headphones
- Press and hold the MFB on the headphone until the
BLUE
LED lights
up and starts flashing (about once every 2 seconds).
For the Black headphone
, it will always auto reconnect to the transmitter, close to on the trans-
mitter and LED on the BLACK headphone will both turn solid
BLUE
, indicating that they’ve successfully
connected.
For the RED headphone
, click MFB once to reconnect to the transmitter. Once connected, close to
on the transmitter and LED on the RED headphone will turn solid
BLUE
.
Reconnect
The BLACK headphone
will always auto reconnect to the transmitter.
The RED headphone
, click once,
it will reconnect to the last connected device, e.g., transmitter, phone, tablet. So, if the transmitter is not its
last connected device,you need to
manually pairing the RED headphone to the transmitter:
Enter on the transmitter into PAIRNG mode
– Press and hold for 3-5 seconds until close to
flash
RED
and
BLUE
alternately.
Enter the RED headphone into PAIRNG mode
– Press and hold MFB button for 5 seconds suntil LED on
headphone flash
RED
and
BLUE
alternately.
Keep them together and wait for a few seconds, close to on the transmitter and LED on headphone will turn
solid
BLUE
, indicating that they’ve successfully connected.
Connect transmitter to your TV/audio source
Check your TV/Audio Source output options
HT41899 works with OPTICAL output, AUX 3.5mm output, and RCA (labeled “AUDIO OUT”) output.
If your TV has Digital Optical Out
Please use the Optical cable to connect the transmitter and TV.
Ensure your TV’s Sound Out/Speaker setting is set to “External Speaker” or “Optical audio out”, e.g.: Samsung >
Audio Out/Optical; LG > Optical Out. Various on other TV brands.
Ensure your TV’s Audio Format/Digital Sound Out setting is set to “PCM” or set the Dolby / DTS Digital setting to
“OFF”.
