3
Reconnect to Bluetooth device
Normally, when the next time you turn on Avantree HS063, it will automatically reconnect to the most recently
paired device. In case it doesn’t auto reconnect, try either pressing once to enter it into Reconnection Mode
or try reconnecting manually by selecting “Avantree HS063” on your mobile device’s Bluetooth menu.
Using as a wired headphone
To use it as a wired headphone connect one end of the 3.5mm audio cable we provided to the HS063
headphone, and plug the other end into the headphone jack of the broadcasting device you’re using.
Note: The headphone will power off automatically once you plug in the 3.5mm audio cable
.
Charging
If you start to hear a “beep” sound every minute, it’s an indication that the battery level is low. To charge the
headphone,connect it to a power source using the USB cable we provided. Either a USB wall charger (DC 5V /
0.5-2A) or apowered computer USB port would work. The LED indicator on the headphones will remain RED
while charging and will turn off when charging is complete.