Note:
If you’d like to use an USB cable that’s not provided by us, please ensure that the USB cable supports
both data syncing and power.
After connecting the micro USB cable as above, you should be able to hear from your computer
through your headphones, and the “USB” indicator on the transmitter will light up; if not:
Right-click the speaker icon on the bottom-right corner of the PC/laptop screen and select “Playback
devices.” In there, set “Avantree Audikast Plus” as “Default Device.”
To use the Audikast Plus as a microphone device, please go to your audio settings and select
“Avantree Audikast Plus” as “Microphone and Speaker device.”
Add a 2
nd
pair of Bluetooth headphone
Step 1:
Pair and connect the transmitter to the1st Bluetooth headphone.
Step 2:
Enter the transmitter into PAIRING MODE manually - press and hold
for 1second. The
close to B will flash
RED
and
BLUE
alternately.
Step 3:
Place your 2nd set of headphones into Bluetooth PAIRING MODE (please refer to your 2
nd
headphones’ user manual.)
Step 4:
Keep the two devices close to each other and wait. Once connected, the
close to
on the
transmitter will turn SOLID
BLUE
.
6
Set Avantree Audikast Plus as the playback device
Avantree Audikast Plus
Set Avantree Audikast Plus as the Speakers and Microphone
(Avantree Audikast Plus)
(Avantree Audikast Plus)
B
B
