Multi-point: pairing 2 phones simultaneously
Step 1
Connect the first phone (instructions above) then turn off its Bluetooth function.
Step 2
Set the CK210 into pairing mode again.
Step 3
Turn on Bluetooth on the second phone and connect with the CK210.
Step 4
Reboot the CK210 by turning it off then on again. Turn on the Bluetooth on the first phone.
Both phones will now be connected to the CK210.
Clear pairing history
You may need to reset the CK210 if it is not working as expected. Whenreset to its factory default
settings, all the paired device information will be erased.
Step 1
Set the CK210 to PAIRING MODE – press and hold the MFB for 3 seconds until the LED flashes
BLUE
and
RED
alternately.
Step 2
Double click the MFB – the
BLUE
and
RED
LEDs will turn on for 1 secondto indicate a successful
reset. Then it will automatically enter pairing mode.
How to charge
When the battery runs low, the
RED
LED will flash every 2 seconds. Recharge the CK210 by plugging it
into a USB car charger (not supplied) or PC USB port using the supplied charging cable. It normally takes
1.5 hrs to fully charge the battery. The LED will indicate red when charging and turn off when charging is
completed.
Charging requirements: DC5.0V/ 500mA-1A.
Product specifications
• BT Version: 4.0
• Support Profile: A2DP, AVRCP, HSP, HFP
• Operation Frequency Band: 2.4GHz ~ 2.48GHz unlicensed ISM band
• Operation Range: Class 2, Up to 30ft.
• Working Time: 8 hours
• Standby Time: 130 hours
• Charging Time: 1.5 hours
• Charger Voltage: DC5.0V, 500mA
5
