3
Reconnect to Bluetooth device
Normally, once powered on, the headphones will reconnect to the last connected device. If it doesn’t
automatically connect, please select “Avantree AS9PA” from your device’s Bluetooth menu to connect
manually. (If you’re using a Bluetooth transmitter, please refer its user manual to reconnect)
Build the Broadcast Network
Simultaneously share your audio with up to 100 other AS9PA headphones by using the built-in
broadcast function.
1. Select one AS9PA as the
BROADCAST unit
. The others will act as RECEIVER headphone units.
2. For
BROADCAST headphone -
1) Ensure the headphone is
connected
to a Bluetooth device. The LED should be solid
BLUE
.
2) Hold
for 5 seconds to activate the Broadcast function, the LED will flash
GREEN
slowly
(once every 5 seconds)
3) Press
once to ready pairing with RECEIVER headphones, the LED will flash
GREEN
rapidly.
3. For RECEIVER headphones –
1) Switch ON the headphone.
2) Ensure the headphone is
NOT connected
to any device(s) via Bluetooth OR a 3.5mm audio cable.
3) Hold
for 5 seconds to activate the Broadcast function, the LED will flash WHITE slowly
(once every 5 seconds)
4) Press
once to ready pairing with BROADCAST headphone, the LED will flash WHITE rapidly.
4. Connect
Keep the BROADCAST headphone (LED flashes
GREEN
rapidly) and RECEIVER headphone (LED flashes WHITE
rapidly) close together and wait for 5~10 seconds as they connect. Once connected, the RECEIVER headphone’s
LED will turn
solid WHITE
. During audio or voice broadcast from the BROADCAST headphone, its LED will turn
solid GREEN
.
1
st
2
nd
100
th
⋯⋯
⋯⋯⋯⋯
