3
Broadcast Receiving Mode
The Broadcast function allows the user to connect to up to 100 receivers (such as AS70) to one single transmitter
(such as DG60) simultaneously. This function is perfect for situations where you need audio being played
through multiple speakers wirelessly. To use it:
1. Set the Broadcast transmitter into broadcast pairing mode (please refer to its user manual.)
2. Set AS70 into broadcast mode-
a) Turn on, press &hold
MODE
button for 2 seconds, AS70 will switch to broadcast receiver mode with the
LED indicator slowly flashing
WHITE
.
b) Tap the
MODE
button again, the AS70 will enter broadcast pairing mode (LED flashing speeds up.)
3. Keep the two devices close to each other. Once connected, the LED indicator on AS70 will turn
SOLID WHITE
.
Clear Paired History
One may need to clear paired history when experience short range, audio cuts, cannot reconnect or pair.
Turn on the AS70. Press and hold both button “+” and “-” for 5 seconds, LED lights up
BLUE
and
RED
for 2 seconds (
looks like
PINK
), now all paired history of AS70 is cleared and AS70 will enter pairing mode automatically.
Charging
When the LED indicator starts flashing
RED
, you should charge the device.
Connect the AS70 to a power source using the micro-USB cable we provided. You may either use a wall plug
with 5V/500mA-1A (please utilize an USB-wall plug adapter such as a mobile phone charger) or a PCUSB port.
The LED indicator will turn
RED
while charging and turn
BLUE
when the charging is complete. It normally takes
around 2 hours to fully charge.
