Office Massage Chair Assembly Guide
Parts List
No.
Image
Name
Qty.
A
Wheel
5
B
Base
1
C
Gas Strut
1
* D
Strut Cover
1
E
Height
Adjustment
Lever
1
F
M6x20mm
Screw
4
G
M6x25mm
Screw
8
H
Arm Rest
2
I
Seat Base
1
J
Back Support
1
K
Cap
8
1
: Attach wheels (
A
) to frame (
B
), then
insert gas strut (
C
) into base. Some non-
chrome models may include a strut cover
(
D
)
– if included, place it over the strut.
2
: Attach height adjustment lever (
E
) to
the seat base (
I
) using 4 M6x20mm
screws (
F
). The end of the lever should
face toward the front of the chair.
3
: Attach each arm rest (
H
) to the
seat base (
I
) using 2 M6x25mm
screws (
G
), then attach the back
support (
J
) to each arm rest using
2 M6x25mm screws (
G
).
4
: Push the seat assembly firmly on to the
top of the gas strut.
5
: Insert a cap (
K
) into each arm rest
screw hole.
The chair is now ready for use.
*
Applies to some non-chrome finish models.
Design and appearance may vary to those shown in this guide.
