Avante FURMDKAVNAH12 Скачать руководство пользователя страница 2

Motorised Height Adjustable Desk 

 

E&OE 

© 2017 Avante 

Safety 

Basic precautions, including the following important safety instructions, should always be followed when 

using this equipment. Read all instructions before use. 

To reduce the risk of electric shock, always unplug the equipment from the electrical outlet after use 

and before cleaning, assembling, or servicing. Failure to follow these instructions may lead to 

personal injury and cause damage to the equipment. 

 

Use this product for its intended use only as described in this user manual. Do not use attachments not 

supplied or recommended by the manufacturer. 

 

Never operate the unit with a damaged electrical cord or plug, or if it is malfunctioning. If it has been 

dropped, damaged or exposed to water, have the unit inspected/repaired at an authorised service 

centre. 

 

If the electrical cord or any device cabling is damaged, it must be replaced by the manufacturer, its 

service agent or similarly qualified persons in order to avoid it being a potential hazard. 

 

This equipment must be connected to a nominal 240VAC / 50Hz grounded electrical supply. 

 

Maximum weight capacity = 80 kg.

 

 

Do not attempt any maintenance or adjustments other than those described in this user manual. Should 

any problems arise, discontinue use and consult an authorised service centre. 

 

Do NOT use the unit outdoors. 

 

Do NOT use the equipment in temperatures lower than 0°C or more than 40°C. 

 

Do NOT pull the equipment by its electrical cord or use the cord as a handle. 

 

Do NOT allow children to play on or around the desk. 

 

Keep the equipment on a flat and level surface. 

 

This equipment is not intended for use by persons (including children) with reduced physical, sensory or 

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or 

instruction concerning use of the equipment by a person responsible for their safety. 

 

 

Содержание FURMDKAVNAH12













Отзывы: