User Manual
4 www.AvantcoEquipment.com
Examples of Usable Pans
Steel or cast iron, enameled iron, stainless steel, flat-bottom pans / pots with diameter from 4 ¾ inches to 10 ¼ inches.
Examples of Non-Usable Pans
Heat-resistant glass, ceramic, copper, aluminum pans/pots. Rounded-bottom pans/pots with bottom measuring less
than 4 ¾ inches.
Safety Functions
Error Message
Cause
Solution
E00
No cookware on plate or non-usable cookware.
Place suitable cookware on cooking plate.
E01
The cooker has become too hot
(e.g. due to blocked ventilation slots).
Clear vents, let cooker cool down before restarting.
If error message continues contact manufacturer.
E02
Overheating-protection was activated
and the cooker has switched off.
Remove cookware from cooker and let unit cool
down before restarting.
E03
Temporary voltage overlad. Cooker
became too hot.
Let cooker cool down before restarting.
Cleaning and Maintenance
Caution!
Danger of burning and electric shock! Always switch off and unplug your appliance after use and before
cleaning. Let the appliance cool down before cleaning and storage. Never immerse the appliance in water or clean it
under running water.
1). Disconnect plug and wait until the unit is cooled down completely. Clean after every use.
2). Do not use benzine, thinner, scrubbing brush or polishing powder to clean the induction cooker.
3). Wipe using soapy water and a damp cloth. Make sure the unit dries completely before plugging it back in.
4). Make sure the air intake and exhaust vents are clear. Use a vacuum cleaner to remove dust and debris.
