User Manual
www.AvantcoEquipment.com 3
• Do not block air intake or exhaust vent.
• Do not touch the cooker top after removing cookware, as the top will remain hot before cooling.
• Do not place cooker near objects which are affected by magnetic currents such as: radios, televisions, automatic-
banking cards and cassette tapes.
• The power cord must be replaced by qualified technicians.
Warning:
Children should be supervised to ensure that they do not play with the appliance.
Before First Use
• Remove all packaging components and make sure that the appliance was not damaged during shipping.
• Before using for the first time clean the unit surface with a slightly moist cloth and dry
(see “Cleaning and Maintenance”).
Operation
1). Insert the plug into a suitable socket. A long beep will sound. The display wil flash "8888" and then automatically
switch the unit into Standby Mode.
2). Push the ON/OFF switch to turn the burner on. A short beep will sound. Each burner is independently controlled.
3). Push the FUNCTION button to switch between the timer mode, wattage mode and temperate mode settings. The
indicator light will illuminate on the current mode selection. Use the “+” and “-“ buttons to increase or decrease the
set time, wattage setting, or temperature setting for each side of the induction range.
a.
Timer –
The timer mode is adjustable from 0 – 175 minutes (5 minute increments). This is an optional timer. If
you do not set the timer, it will default to 175 minutes and then shut off for safety reasons.
b.
Wattage –
The wattage mode is adjustable for both the left and right side. The power level of the left burner is
adjustable from 300W – 1000W. The power level of the right burner is adjustable from 300W – 800W.
Left:
300 / 600 / 700 / 800 / 1000W
Right:
300 / 500 / 600 / 700 / 800W
c.
Temperature –
The temperature (
O
F) mode is adjustable from 140-460
O
F on both the left and right side. There
are 17 settings in 20
O
F increments.
Temperature:
140 / 160 / 180 / 200 / 220 / 240 / 260 / 280 / 300 / 320 / 340 / 360 / 380 / 400 / 420 / 440 / 460
4). A lock feature prevents tampering and changing of any setting. To use the lock function, press and hold the lock
button for 3 seconds to activate. The lock indicator light will illuminate to indicate the settings are locked. To unlock,
hold the lock button for 3 seconds.
5). After use, allow unit to cool before cleaning and storing (see “Cleaning and Maintenance”). This induction range has
a 60 second cool down fan that will run once the unit is powered off.
Do not use pans with a bottom diameter greater than 10 ¼”.
Doing so causes irreparable damage to this induction range.
