background image

Page  |  

1

   

INSTALLATION, OPERATION & MAINTENANCE

AVANTCO SERIES 177AG OWNER’S MANUAL

02/2019

All equipment manufactured by Avantco is for use with the type of gas specified on the rating plate

and for installation that will be in accordance with National Fuel Gas Code ANSI Z223.1 (latest edition).

Instructions to be followed in the event the user smells gas must be posted in a prominent

location in the kitchen area. This information shall be obtained from the local gas supplier.

PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE

This equipment is design engineered for commercial use only.

Manual Griddles:

Radiant Charbroilers:

Hot Plates:

177AG24MG • 177AG36MG • 177AG48MG

177AG24RC • 177AG36RC • 177AG48RC

177AGR212 • 177AGR424 • 177AGR636

FOR YOUR SAFETY:

 Do not store or use gasoline or other flammable vapors 

or liquids in the vicinity of this or any other appliance.

WARNING:

 Improper installation, adjustment, alteration, service or 

maintenance can cause property damage, injury or death. Read the installation, 

operating and maintenance instructions thoroughly before installing or 

servicing this equipment.

Содержание 177AG series


















Отзывы: