AVANT A424013, Руководство оператора для насадки

Страница: 6 / 36

6 (36)
2. Designed purpose of use
The AVANT Silage dispenser is an attachment that is suitable for use with AVANT multi purpose loaders that
are shown in Table 1. The attachment is intended for dispensing precision chopped silage and feeding stuffs
made with feed mixers. It is a quick and easy way to distribute silage in cowhouses, poultry farms etc. The
dispenser bucket can be filled like a normal bucket directly from floor level, or from a silo. The bucket
distributes silage to about 10 cows / fill - it takes approx. 10 minutes to distribute silage to 50 cows.
Inside the bucket there is a hydraulically driven conveyor and discharging openings to both right and left side.
Material can be discharged to the left or to the right by turning the auxiliary hydraulics control lever of the
loader in either direction. Adjustable side hatches allow controlled distribution of looser materials like crushed
grain as well. Manual side hatch adjustment is a standard feature, hydraulic side hatch operation is available
as an option. Operating speed is adjustable by controlling the auxiliary hydraulics flow of the loader with the
engine RPM.
The bucket is intended only for soft, loose materials typically used at farms. The Silage dispenser is not
designed for any other use than what is specified in this manual and must not be used for any other purposes
than what is intended for.
The attachment has been designed to require as little maintenance as possible. The operator can perform
regular maintenance tasks. All repair work can’t be performed by the operator, and demanding repair and
maintenance operations are to be left for professional technicians. All maintenance work must be done using
proper safety equipment. Spare parts must be identical with original specifications, which can be ensured by
using only original spare parts. A separate spare parts catalogue may be available, consult your Avant dealer.
Familiarise yourself with the manual's instructions regarding service and maintenance. Please contact your
AVANT dealer if you have additional questions about the operation or maintenance of the equipment, or if you
require spare parts or maintenance services.
Table 1 - Silage dispenser - Compatibility with Avant loaders
Model
220
225
225LPG
313S
320S
420
423
520
523
525LPG
R20
R28
528
530
630
R35
635
640
735
745
750
755i
760i
850
860i
e5
e6
A424013
-
(•) (•) • • • • (•)
The compatibility recommendations are based on the width of the loader, lifting capacity, and adequate
breakout force. Normally the width of the attachment should match roughly the width of the loader. When
using too wide attachment the actual breakout force (bucket tilting capacity) decreases and the overall
performance will decrease.
It is recommended to use the attachment only with loaders marked with • in Table 1. When using with models
marked with (
•
), full performance may not be achieved. Additional counterweights may also be required. For
compatibility with a model not shown in table, contact your Avant dealer.