background image

CAUTION / INFORMATION 

 

IMPORTANT

: Please read this manual carefully. 

 

1. This height-adjustable desk has electric motors and is designed for use in dry work areas 

only. 

 

2. Make sure no obstacles are in the desk’s path.

 

 Make sure the desktop is not touching any walls. 

 Make sure all cords are appropriate length to accommodate the change in height. 

 

3. Do not sit or stand on the desk frame. 

 Do not crawl or lie under the desk frame. 

 

4. Do not place any objects taller tha

n 20” underneath the desk.

 

 

5. Do not open any of the components 

 the legs, control box or switch. There is a risk of injury 

and electric shock. 

 

6. Make sure that the power supply is between 100v and 240v before plugging the control box 

into it. 

 

7. This product is designed with a 10% duty cycle (2 min. on, 18 min. off). 

 

8. Under no circumstances does the manufacturer accept warranty claims or liability claims 

for damages caused by improper use or handling of the desk frame. 

 

 

SAFETY INSTRUCTIONS 

 

1. Keep all electrical components away from liquids. 

There is a risk of injury and electric shock. 

EN

Содержание DESTIN II









Отзывы: