HID-2100 User Manual
HID-2100 Quick Reference Guide
30
5. General Safety Guide
For your own safety and that of your equipment, always take the following
precautions.
Disconnect the power plug (by pulling the plug, not the cord), from your computer if
any of the following conditions exists:
The power cord or plug becomes frayed or otherwise damaged
You spill something into the case
Your computer has been dropped or the case has been otherwise damaged
You suspect that your computer needs service or repair
You want to clean the computer or screen
You want to remove/install any parts
Thermal
The HID-2100 is a fanless design system, heat is dispatch through rear metal
heatsink which is located at VESA mount area. When using your HID-2100 systems, it
is normal for the metal heatsink to get warm. The rear metal heatsink of the HID-2100
functions as a cooling surface that transfers heat from inside the computer to the
cooler air outside. Do not block this heatsink by any soft material.
Disconnect the power
The only way to disconnect power completely is to unplug the adapter power cord.
Make sure at least one end of the power cord is within easy reach so that you can
unplug the computer when you need to.
Warning! Your AC cord came equipped with a three-wire grounding plug (a plug that
has a third grounding pin). This plug will fit only a grounded AC outlet. If
you are unable to insert the plug into an outlet because the outlet is not
grounded, contact a licensed electrician to replace the outlet with a
properly grounded outlet. Do not defeat the purpose of the grounding plug.
Warning! Never push objects of any kind into this product through the openings in the
case. Doing so may be dangerous and result in fire or a dangerous
electric shock.
