3
Carbon Filter
A built‐in carbon filter protects your wine by acting as a natural barrier against harmful odors.
Internal Fan
This is an air‐cooled unit equipped with an internal fan that maintains a consistent internal temperature.
Installing Your Wine Refrigerator
The wine refrigerator should be installed in accordance with local electrical code requirements. It should
also be placed in a location that is strong enough to support its total weight, keeping in mind that it will
weigh substantially more when fully loaded than when empty.
Before you plug the wine refrigerator into a power supply, be sure to let it stand upright for at least 24
hours to allow the compressor’s oils to settle.
Note: The carbon filter should be replaced every 3 ‐ 6 months depending on the unit’s exposure level to
odor. If the unit is placed in a kitchen, regular replacement every three (3) months is ideal.
Tip: Gather the model and serial number from the product label and write them down before installing the
wine cooler.
Warning: Use two or more people to move and install the wine refrigerator. Failure to do so can result in
back or other injury. Carefully remove the packaging materials. Remove any shipping tape and glue from
your wine refrigerator before using. Do not use sharp instruments, rubbing alcohol, flammable fluids, or
abrasive cleaners to remove tape or glue. These products can damage the surface of your wine
refrigerator.
Important: Do not remove any safety, warning, or product information labels from your wine refrigerator.
