Avallon AWBC241GGFDBLSS, Руководство пользователя

Страница: 9 / 21

4
TYPES OF INSTALLATION:
This wine and beverage refrigerator has been designed for freestanding or built-in installation. In every
case, there must be adequate ventilation and access for service.
Freestanding Installation
A freestanding installation will allow you to install the wine and beverage refrigerator in almost any place
you desire. You must follow the stated instructions for electrical requirements and leveling the wine and
beverage refrigerator.
Built-in Installation
A recessed installation will allow you to install the wine and beverage refrigerator under a counter or in a
kitchen cabinet provided the clearance space requirements around the wine and beverage refrigerator
are followed. It is necessary to allow adequate ventilation space around the unit (make sure there is at
least some ventilation room for the back of the unit). The following additional items must be observed:
1.
Place the wine and beverage refrigerator in front of the installation location.
2. Adjust the feet and place the unit flat on the floor or on a platform depending on your installation
requirements.
3. If the electrical outlet for the wine and beverage refrigerator is behind the cabinet, plug in the wine
and beverage refrigerator.
4. Push the wine and beverage refrigerator into position.
5.
Warning: Use two or more people to move and install the wine and beverage refrigerator. Failure to do so
can result in back or other injury. Carefully remove the packaging materials. Remove any shipping tape and
glue from your wine and beverage refrigerator before using. Do not use sharp instruments, rubbing
alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the
surface of your wine and beverage refrigerator.
Important: Do not remove any safety, warning, or product information labels from your wine and beverage
refrigerator.
Warning: DO NOT install the wine and beverage refrigerator behind a closed cabinet door.