8
Right Zone
1.
Open the door completely.
2.
Make sure the shelf is pushed back completely.
3.
Lift either the left or right side of the shelf to create a 45° angle from its original position. Make
sure not to lift either side of the shelf too hard as it may come in contact with the inner wall mount.
4.
Pull the shelf outward until it is removed from the inner compartment. You may encounter some
resistance from the shelf guard rail.
Operation
INSTALLATION CHECK-LIST BEFORE OPERATION:
1.
Have all packing materials and tape been removed from the interior and exterior of the wine and
beverage refrigerator?
2.
Have the installation instructions been followed, including connecting the machine to electricity?
3.
Has proper grounding been installed for the wine and beverage refrigerator?
4.
Has the machine been leveled?
5.
Is the wine and beverage refrigerator in a site where the ambient temperature is between 50° F and 90° F all
year round?
6.
Is there a clearance of at least 1
”
to 2
” at the rear for
proper air circulation?
Tip: To prevent damaging the door gasket, make sure to open the door fully before pulling the shelves out
of their track.
Note: The refrigerator may experience decreased cooling efficiency if air flow is restricted due to a fully
loaded cabinet.
Содержание AWBC241GGFDBLSS
Страница 7: ...2 Parts Identification Back View ...
