Avallon AFR152SSODLH, Руководство пользователя

Страница: 10 / 21

10
ELECTRIC SHOCK HAZARD!
• Plug into a grounded 3-prong outlet.
• Never remove the grounding prong from the plug.
• Never use an adapter to bypass the grounding prong.
• DO NOT use an extension cord.
• Failure to follow these instructions can result in fire, electrical shock, or death.
Electrical Requirements
Recommended Grounding Method
Before you move your refrigerator into its final location, it is important to make sure you have the proper
electrical connection:
• A standard electrical supply (115 V, 60Hz), properly grounded in accordance with the National Electrical
Code and local codes and ordinances, is required.
• It is recommended that a separate circuit, serving only your refrigerator, be provided. Use receptacles that
cannot be turned off by a switch or pull chain.
• The fuse (or circuit breaker) size should be 15 Amps.
For your personal safety, this appliance must be grounded. It is equipped with a power supply cord that has a
3-pronged grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-pronged
wall socket, and grounded in accordance with the National Electrical Code and local codes and ordinances. If a
mating wall socket is not available, it is the personal responsibility of the customer to have a properly grounded,
3-prong wall receptacle installed by a qualified electrician.
Leveling the Refrigerator
The refrigerator should be installed on a firm and level surface that will
be able to support the entire weight of a fully loaded unit. It is important
for the refrigerator to be leveled in order to work properly. It can be
raised or lowered by rotating the plastic sheaths around each of the feet
on the bottom of the machine. If you find that the surface is not level,
rotate the feet until the refrigerator becomes level. You may need to
make several adjustments to level it. We recommend using a carpenter’s
level to check the machine. Turn the leveling feet to the right to lower
that side of the refrigerator. Turn the leveling feet to the left to raise that
side of the refrigerator.
Important: Once you are ready to install the unit in a cabinet or directly on the floor, you must
adjust the feet to level the refrigerator.
!