13
Operation
Installation Checklist before Operation
Using the Temperature Control Panel
The refrigerator has a temperature range of 34° F to 65° F.
F
RUN
Power Button:
Turns the unit on and off. Press and hold this button for approximately 3 seconds to
adjust between power on and power off.
Light Button:
Press this button to alternate between the three internal light colors: Blue, white,
and amber. Please refer to the “Internal Light” section for further details.
Up Button:
Press this button on the control panel to increase the temperature by 1 degree
increments.
Down Button:
Press this button on the control panel to lower the temperature by 1 degree
increments.
Run Light:
When lit, the unit is in cooling mode.
The
Celsius (C) or Fahrenheit (F) indicator
will be lit depending on which unit of temperature
measurement is being used. To switch between C and F, press and hold both the Up and Down
buttons simultaneously for approximately 3 seconds. A beep will sound and the indicator light will
illuminate next to the desired temperature setting.
1.
Have all packing materials and tape been removed from the interior and exterior of the refrigerator?
2.
Have the installation instructions been followed, including connecting the machine to electricity? And has
proper grounding been installed for the refrigerator?
3.
Has the machine been leveled?
4.
Is the refrigerator in a site where the ambient temperature is between 50° F and 90° F all year round?
5.
Is there a clearance of at least 1- 2” at the rear, 1/4” at the top, and 1/4” at the sides for proper air
circulation?
i
i
