Avago LSI SAS 9211-4i, Руководство пользователя

Страница: 6 / 11

Avago Technologies
- 6 -
LSI SAS 9211-4i PCI Express to 6Gb/s SAS HBA User Guide
October 2014 LSI SAS 9211-4i HBA Characteristics
Activity LED Header (J3). The LSI SAS 9211-4i HBA has a 4-pin, right-angle, 0.1-in. pitch header for driving external
activity LEDs. The 4-pin header connects to two LEDs, which indicate SAS activity on Port 0 and Port 1.
UART Connector (J5). The UART connector debug port requires a special cable and LSI support to gather detailed
Input/Output Controller (IOC) status.
5.3 Physical Characteristics
The LSI SAS 9211-4i HBA is a 6.6-in. x 2.713-in., low-profile board. The component height on the top and bottom of the
LSI SAS 9211-4i HBA is in accordance with the PCIe specification. The following figure shows the board connectors.
Figure 1 LSI SAS 9211-4i Board Layout

J1: PCIe x4-lane board edge connector

J3: 4-pin, right angle, 0.1-in. pitch, pin header for driving the external activity LED
Table 3 LSI SAS 9211-4i HBA LED Header Pinout
Pin Function
1 3.3 V
2 Port 0
3 Port 0
4 3.3 V
Table 4 LSI SAS 9211-4i UART Pinout
Pin Function
1 UART0_TX
2 Gnd
3 UART0_RX
4 3.3 V
J1
J3
J5
3_00002-03
J7
LSI SAS 2004