1. Introduction
Features
10
OneConnect OCe14000B-series Adapters Installation Manual
pub-005129 Rev. A
Figure 1-3
Emulex OCe14401B Adapter
Features
General Features
Eight-lane (x8) Generation 3 PCIe interface at 8GTps, 5GTps, or 2.5GTps
(auto-negotiated with system)
Parts and construction are compliant to the European Union Directive of RoHS,
and similar regulatory requirements for other countries
Standard, full height I/O bracket is factory-installed. The standard, full-height
form factor is 6.600 inches by 4.3760 inches (167.64 mm by 111.15 mm); for
low–profile adapters, an optional low–profile I/O bracket is included. The
low-profile PCIe form factor PCB is 6.600 inches by 2.713 inches (167.64 mm by
68.910 mm).
External volatile memory: 2GB or 4GB DDR3 SDRAM technology
On-board flash memory: The flash is 128Mbit with a serial peripheral interface
(SPI) interface. The flash contains the firmware, vital product data (VPD), and
boot BIOS images. You can update the flash with Emulex utilities.
Interoperates with existing FC SAN infrastructures such as switches, arrays,
storage resource management (SRM) tools (including Emulex utilities), SAN
practices, and so forth.
Host interface support is provided through Emulex standard drivers
Jumper-enabled Secure Firmware feature
Support for RoCE v2 NIC operating system drivers (Windows Server and Linux
OpenFabrics Enterprise Distribution (OFED))
