AutoXray EX-SCAN 5000, Руководство пользователя

Страница: 13 / 97

1. Locate the vehicle computer connection:
• [OBD-II / GM OBD-I] On OBD-II and GM vehicles, the con-
nector is usually located under the drivers side of the dash-
board. On some vehicles, the connector is located behind
the kick panels, ashtray, or radio.
• [Ford / Chrysler 83-95, OBD-I] The connector on Ford and
Chrysler vehicles is usually located in the engine
compartment, along the outside perimeter of the engine
compartment, or by the shock absorber towers.
NOTE:
For additional connection location information, including
the “OBD Connector Locations Database,” please look at
the Customer Support page on the AutoXray web site
(www.autoxray.com).
2. Make sure that all the pins are straight and that the connecting
surfaces are free of oils, grease, and moisture.
CAUTION:
Do not force the cable connector into the scanner or
into the vehicle computer connection.
3. Push the scanner cable and vehicle connectors together firmly.
• [Ford] The EEC-IV Ford connector has a trapezoid shaped
connector and a small square connector next to it. Make
sure both connectors are correctly plugged into the scanner
cable connector.
NOTE:
Make sure the scanner cable and vehicle connectors are
always properly seated during all test procedures.
4. Insert the EZ-SCAN cable connector into the top of the scanner.
SCAN -
A
LL
OBD-II, GM OBD-I, C
HRYSLER
OBD-I
Page 13