PROGRAMMING
XT-35 Transmitter for the CPX-2600 & CPX-3600
PROGRAMMING TRANSMITTER:
Enter:
1. Turn the Ignition switch
“OFF/ON” 3 TIMES
and stay in
ON
position. Within 15 seconds,
2. Push the Valet switch
3
times (hold in on the
3
rd
push); when
one
long chirp is heard then
release the valet switch. You are now in the Transmitter programming mode.
Program:
1. Press any button on the first transmitter until the siren responds with a confirming chirp; the
first transmitter is now programmed.
2. Press any button on the second transmitter until the siren responds with a confirming chirp;
the second transmitter is now programmed.
3. Apply the same procedure to program any 3rd and 4
th
transmitters.
Exit:
Turn Ignition to
“OFF”
position, or leave it for 15 seconds.
Three
long chirps will confirm
exit.
Note:
If more than 4 transmitters programmed, the system will only keep the last 4 transmitters.
