Autonics LP-A Series, Руководство пользователя

Страница: 97 / 106

9 Appendix
© Copyright Reserved Autonics Co., Ltd. 97
9.2 CAN Memory Mapping
9.2.1 Overview
Due to the characteristic of DeviceNet, there is only a part that sets the output value of the
output device.
However, since the LP must knowthe current value even if it is output device, it consists of
‘output device command area’ for setting the output value and ‘output device current value area’
for checking the current value.
(1) Input device area
 Area where modules for input from Slave connected to DeviceNet are assigned
 Size: 512byte=(max. number of connectable Slaves (63)+1)×Memory size per Slave (8byte)
 Address: UW65536 ~ UW65791
(2) Output device command area
 Area assigned to set the output value on the module for the output of Slave connected to
DeviceNet
 Size: 512byte=(max. number of connectable Slaves (63)+1)×Memory size per Slave (8byte)
 Address: UW65792 ~ UW66047
(3) Output device current value area
 Area assigned to read the current value of the module for the output of Slave connected to
DeviceNet

Size: 512byte=(max. number of connectable Slaves (63)+1)×Memory size per Slave (8byte)

Address: UW66048 ~ UW66303