Autonics KPN Series, Руководство пользователя по связи, Страница: 17 / 26

2 Modbus Mapping Table
© Copyright Reserved Autonics Co., Ltd. 17
2 Modbus Mapping Table
2.1 Read Coils(Func01) / Write Single
Coil(Func05)
No(Address) Type Description Set range Unit Factory default
000001(0000) RUN/STOP Control output RUN/STOP 0: RUN 1: STOP - RUN
000002(0001)
Auto-tuning
RUN/STOP
Auto-tuning RUN/STOP 0:
OFF
0:
ON
-
OFF
000003 to 000050 Reserved
2.2 Read Discrete Inputs(Func02)
No(Address) Type Description Set range Unit Factory default
100001(0000)
℃ lamp
Unit display lamp
0: OFF 1: ON - -
100002(0001) ℉
lamp
0: OFF 1: ON - -
100003(0002) % lamp 0: OFF 1: ON - -
100004(0003) OUT1 lamp Control output1 display lamp 0: OFF 1: ON - -
100005(0004) OUT2 lamp Control output2 display lamp 0: OFF 1: ON - -
100006(0005) AT lamp Auto-tuning RUNlamp 0: OFF 1: ON - -
100007(0006) SV1 lamp Multi-SV1 lamp 0: OFF 1: ON - -
100008(0007) SV2 lamp Multi-SV2 lamp 0: OFF 1: ON - -
100009(0008) SV3 lamp Multi-SV3 lamp 0: OFF 1: ON - -
100010(0009) AL1 lamp Alarm output1 display lamp 0: OFF 1: ON - -
100011(000A) AL2 lamp Alarm output2 display lamp 0: OFF 1: ON - -
100012(000B) AL3 lamp Alarm output3 display lamp 0: OFF 1: ON - -
100013(000C) MAN lamp Manual control display lamp 0: OFF 1: ON
100014(000D) DI-1 input DI-1 input status 0: OFF 1: ON - -
100015(000E) DI-2 input DI-2 input status 0: OFF 1: ON - -
100016 to
100050
Reserved