-|Transparent Guide|-
TCD210166AA
Piezo Buzzers
B2PB Series
For your safety, read and follow the considerations written in the instruction
manual, other manuals and Autonics website.
The specifications, dimensions, etc. are subject to change without notice for product
improvement. Some models may be discontinued without notice.
ᜢ ᜫ
Features
•
Clear and loud sound : up to 98 ±8 dB (at 0.1m)
•
Select between continuous or intermittent sound settings
•
Mounting hole : Ø22/25 mm / Panel thickness: 6 mm
Panel Mounting
When cutting a hole of the panel to Ø25, the A side should be on the panel. When cutting a hole
of the panel to Ø22, the B side should be on the panel.
A
B
Nut
■
Assembly sequence
: ① → ② → ③
①
②
③
Safety Considerations
•
Observe all ‘Safety Considerations’ for safe and proper operation to avoid hazards.
•
symbol indicates caution due to special circumstances in which hazards may occur.
Warning
Failure to follow instructions may result in serious injury or death.
01. Fail-safe device must be installed when using the unit with machinery that may
cause serious injury or substantial economic loss. (e.g. nuclear power control,
medical equipment, ships, vehicles, railways, aircraft, combustion apparatus,
safety equipment, crime/disaster prevention devices, etc.)
Failure to follow this instruction may result in personal injury, fire, or economic loss.
02. Do not use the unit in the place where flammable/explosive/corrosive gas, high
humidity, direct sunlight, radiant heat, vibration, impact, or salinity may be
present.
Failure to follow this instruction may result in fire or explosion.
03. Do not disassemble or modify the unit.
Failure to follow this instruction may result in electric shock or fire.
04. Check 'Connections' before wiring.
Failure to follow this instruction may result in electric shock or fire.
05. Do not use this unit close to ears.
Failure to follow this instruction may result in injury.
Caution
Failure to follow instructions may result in injury or product damage.
01. Do not use the unit outdoors.
Failure to follow this instruction may result in shorten the life cycle of the unit
02. Use the unit within the rated specifications.
Failure to follow this instruction may result in fire or product damage.
03. When connecting the power input, use AWG 26-16 (0.30 to 1.25 mm
2
)cable and
tighten the terminal screw with a tightening torque of 0.4 to 0.6 N.m.
Failure to follow this instruction may result in fire or malfunction due to contact failure.
04. Use dry cloth to clean the unit, and do not use water or organic solvent.
Failure to follow this instruction may result in electric shock or fire.
Cautions during Use
•
Follow instructions in ‘Cautions during Use’. Otherwise, It may cause unexpected accidents.
•
12 - 24 VDCᜡ power supply should be insulated and limited voltage/current or Class 2, SELV
power supply device.
•
Do not use this unit at below places.
- Place where there is severe vibration or impact
- Place where strong alkalis or acids are used
- Place where there are direct ray of the sun
- Place where strong magnetic field or electric noise are generated
•
This unit may be used in the following environments.
- Indoors (in the environment condition rated in ‘Specifications’)
- Altitude max. 2,000 m
- Pollution degree 2
- Installation Category II
