background image

CLK-1

1-800-633-0405

CLICK Module Insert

www.automationdirect.com/click-plc

3505 HUTCHINSON ROAD 

CUMMING, GA 30040-5860

C0-08SIM  CLICK Expansion I/O Module 

Copyright© 2020, 

Automationdirect.com

 Incorporated/All Rights Reserved Worldwide

Please read and understand the information in this 
insert prior to installation, operation, or servicing 
this equipment.  Please refer to the CLICK User 

Manual (C0-USER-M) for more information 

 

(https://

cdn.automationdirect.com/static/manuals/

c0userm/c0userm.html

).

WARNING

•  Don’t use this equipment in a flammable or explosive environment in order to avoid accidental injury or fire.
•  You should use external electromechanical devices that are independent of the PLC (Programmable Logic 

Controller) system to provide protection for any part of the system. Otherwise, malfunction or output 

failures may result in a hazardous accident.

•  When using this product, connect it to the Click CPU unit.
•  Please ensure that you earth the Ground terminal of the Power Units for CLICK CPU (C0-00AC/01AC) to 

avoid electric shock or equipment damage during a short circuit.

•  Don’t operate the equipment with a nonconforming external power supply to avoid electric shock, 

equipment damage or fire.

•  Don’t intentionally fault wiring, as this may result in equipment damage or fire.
•  To avoid electric shock or malfunctions that might result in an accident, don’t touch any terminal while the 

PLC power is on.  

•  Don’t put metals (e.g. Screwdriver) into radiator holes, drop trash or foreign objects (e.g. wire cut-offs) into 

the device, in order to avoid electric shock or equipment damage.

•  If the equipment is used in a manner not specified by the manufacturer, the protection provided by the 

equipment may be invalidated.

CAUTION

•  Use and store the equipment in an environment described in the specifications (regarding temperature, 

humidity, vibrations, shock, etc.) in order to avoid equipment damage or fire.

•  Ensure all wiring has strain reliefs in order to avoid damage to insulation which might result in electric shock 

or fire.

•  Ensure secondary external power circuits are only live after PLC control program is started. Otherwise a 

malfunction or output failure may result in a hazardous accident.

•  Don’t block the radiator holes. This may cause an increase of internal temperature resulting in equipment 

damage or fire.

•  Don’t disassemble or modify the equipment so as to avoid electric shock, equipment damage, or fire.
•  Cut off all phases of the external power source prior to performing maintenance work, thus avoiding electric 

shock or equipment damage.

General Safety

Please follow the instructions below for personal and operational safety.

In this Insert Sheet, the safety instruction levels are classified into 

“WARNING”

 and 

“CAUTION”

Assumes that incorrect handling may cause hazardous conditions, resulting in 

severe injury or death. 
Assumes that  incorrect handling may cause hazardous conditions, resulting in 

medium or slight injury, or may cause equipment damage. 

WARNING
CAUTION

General Specifications

+

Operating Temperature

32° to 131°F (0° to 55°C) 

Storage Temperature

-4° to 158°F (-20° to 70°C)

Relative Humidity

30% to 95% (non-condensing)

Environmental Air

No corrosive gases permitted (Level 2 environmental pollution)

Agency Approvals

UL61010-2-201  

CE (EN61131-2):2007*;  

RoHS (2011/65/EU) and amendment (EU) 2015/863

+ Keep out iron powder, moisture, oil or chemicals. Isolate from shock or vibration, direct sunlight, and from electric or ferromagnetic field.

 

Meets EMC and Safety requirements.  See the Declaration of Compliance for details.

The C0-08SIM unit toggle switch can get hot 

when mounted in a hot environment.  Wear  

appropriate personal safety equipment before 

use, to avoid possible burns. 

CAUTION

Input Specifications

Inputs per Module 

8 Toggle switches

OFF to ON Response 

Max. 140ms, Typ. 90ms

ON to OFF Response 

Max. 110ms, Typ. 60ms

Status Indicators 

Logic Side (8 points, green LED) 

Power Indicator (green LED)

Bus Power required 

Max. 50mA (All points ON)

C0-08SIM

Отзывы: