Automation Technology FebriScan, Руководство пользователя

Страница: 37 / 49

April 28
th
, 2020
Page 37 of 49
 Compliance with the condition shall be proven by verification
 Minimum resolvable temperature difference (MRTD / NETD): max. 0.1°C
 Image homogeneity: max. 0.2°C deviation over the entire image or over the
image section used for measuring the face. Compliance with the condition must
be verified by testing
Position of the face
 Detection at a height of 0.75 - 2.2m above the ground
 Image layer vertical to the face
Switch on
 Operation must be prevented during the warm-up phase
 Technical alarm condition of at least low priority must be displayed until the
camera is ready for operation (message on screen)
 Spatial resolution: <= 1mm / Pixel
 Emissivity: 0.98 must be set
 Alarm: Display of a physiological alarm condition of at least medium priority when
the temperature threshold is exceeded (graphical alarm display)
Technical Data
IrCamera
General Features
Model IRSX-I 336S IRSX-I 640S
Detector type Focal Plane Array (FPA), uncooled microbolometer
Spectral range 7.5 to 13 μm
Pixel size 17 x 17 μm
Measuring speed 9 Hz 9 Hz
Measurement
Measuring ranges High Gain -40°C to 135°C
NETD < 30 mK @ F/1.0
Lenses
7,5 mm Measuring distance < 1m
13 mm Measuring distance 2m Measuring distance < 1m
25 mm Measuring distance 2m