Automation Technology FebriScan, Руководство пользователя

Страница: 29 / 49

April 28
th
, 2020
Page 29 of 49
 Inform the user that he can leave the test area.
 Take further action if necessary.
System Administration
To change the preset system parameters, log in as user "administrator" immediately after
the system start (see chapter 3.2.1) or click on the FebriScan icon in the upper left corner
to return to the login screen. The following options are available for navigation within the
FebriScan App.
Dashboard
Click on the dashboard to return to the user selection and to switch between the display
forms "Operator" and "Customer / Patient".
Images
The system stores an image of the respective user on the camera when an increased
body temperature is detected. In addition, the time, the measured temperatures and
system-relevant information are stored. For space reasons, only the last 100 images are
stored on the camera.
Configuration
In the Configuration area you can view the preset system parameters or adjust them
according to your needs.
The modification of preset values should only be carried out by trained staff. In
case of doubt, please contact the system manufacturer before changing the
values to prevent system damage or incorrect measurements.