manualshive.com logo in svg

Automation Direct Stride SGW-MQ1611, Руководство пользователя

Поделиться
Скачать
Automation Direct Stride SGW-MQ1611 Скачать руководство пользователя страница 37

Chapter 2: Setup and Operation

2-19

Stride MQTT Gateway User Manual, 1st Edition

Maintenance

From the Maintenance tab, you can check for file system errors, download stored logs and clean temporary 
files. Note that downloaded log files are tar.gz archives and will require an unarchive utility such as WinZip 
or 7-Zip if you need to open them on a Windows PC.

Firmware Upgrade

Upgrading firmware from within the Recovery Mode UI follows the same steps as performing a firmware 
upgrade in normal operating mode, as described in “Firmware” on page 2-16.

It may occasionally be necessary to upgrade the firmware from Recover Mode if a firmware upgrade was 
unsuccessful in the normal operating mode.

Reboot and Return to Normal Mode

To reboot the gateway and return to normal mode, click the 

More Options

 icon in the upper right, then 

click 

Reboot

. Upon reboot the device will use its configured network settings.

Содержание Stride SGW-MQ1611





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды