DPM1-P User Manual, 1st Edition
User Manual - DPM1-P Series Panel Meters
15
Direct Access to Relay Setpoints
The meter allows direct access to the programming of the relay setpoint values. After accessing
programming mode,
Pro
, pressing the
UP
key provides access to each relay setpoint value.
.
.
Relay 1 setpoint
Enter setpoint of 20.0 for
this example
Relay 2 setpoint
Enter setpoint of 80.0 for
this example
Save values
Run Mode
<3 sec.
Programming Mode
Run Mode
Configuration Lock Out
The meter is delivered with the programming not locked out, giving access to all the
programming levels. Once completed the meter programming the following security measures
are recommended:
1. Lock out the programming access to prevent from programmed parameters modifications.
2. Lock out Key Pad functions to prevent from accidental modifications.
3. There are two lockout modes: selective and total. If the parameters are going to be readjusted
frequently, make a selective lockout. If no adjustment is going to be made, make a total
lockout. Key Pad functions lockout is always possible.
4. The access to the lockout routine is allowed by entering a personalized code. If the code set at
factory is changed, be sure to write down your personalized code and keep it in a safe place.