ADC MDM-TEL
Modem
Document
MDM-TEL Application Note.doc
Page 6 of 16
6
Last reviewed: 03/07/2002
Local
Modem
IBM Compatible
Remote
Modem
PLC
MDM-TEL Configuration
The following steps show how to configure the modem for connectivity to the PLC using the
Software Configuration Wizard provided with the modem. Use the 9 pin serial cable to connect
between the serial port of your PC and the ADC modem in order to download the configuration. If
using an ADC modem on both local and remote CPU’s(which is the best possible scenario), use
the same settings for both.
1. Click on PLC Self-Dialing Modem or choose from the Open Configuration File for the saved
configurations. A 250 configuration that will work for all of our PLC’s is loaded when you
install the software:
2. Set this page up as shown below, then click on the Next button:
