Doc #: 160004_04
Part #:13301
KPX-7V2
Wireless Keypad
Legend:
0 - 9
Pin Code Keys
1 - 8
Channel Numbers (CH#)
CLR
Clear Button
FCN
Function button for programming
Doorbell control
Proceed to
Quick Set up Guide
User Information Table
Memory
(MEM)
User Name / Information
Channel (CH#) Allocation
1
2
3
4
5
6
7
8
1
PRIMARY USER PIN ( )
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Channel Function
CH#
Receiver / Function
1
2
3
4
5
6
7
8
0
Safety Rules
• Install the Wireless Keypad in a
location where the garage door
is visible, but out of reach of
children, at a height of at least
1.5m.
• Watch the moving door and
keep people away until the
door is completely opened or
closed. Do not operate door
when persons are near the door.
• Do not allow children to
play with door controls or
transmitters.
Wrong Pin Code
If a wrong pin code is entered,
a specific sound is heard after
pressing the function (FCN) key. The
clear (CLR) key must be pressed to
start re-entering the pin code. On
the fourth consecutive wrong pin
code entry, an alarm (light blinks
and sound beeps) is triggered for
10 seconds. Every next wrong pin
code entry will trigger the alarm.
The time out for the wrong pin code
is one minute.
The Wireless Keypad has built-in
keypad lighting for use at night
or in dark areas. The keypad will
illuminate upon pressing a button.
Built in lighting
