manualshive.com logo in svg

Automatic Systems TriLane TL Series, Техническое руководство

Техническое руководство по продукту Automatic Systems TriLane TL Series доступно для бесплатного скачивания с нашего веб-сайта. Подробная инструкция поможет пользователям разобраться с функционалом и настройками устройства. Скачайте руководство сейчас на manualshive.com и ознакомьтесь с техническими характеристиками продукта.

Поделиться
Скачать
background image

p. 23

/46

TLxx-MT-EN-04

7.2.  DESCRIPTION OF THE STANDARD MECHANISM

7.2.1. 

r

emoving

 

the

 

cover

Access to the mechanism in TL2 version is obtained by removing the cover of the turnstile with two identical keys.

To do this, proceed as follows:

1.  Unlock the locks [4:10] and open the cover [4: 4 ] 

The keys are supplied as accessories in a separate bag.

1

1

2

4:10

4:4

Fig. 14 Removing the cover.

2.  Remove the cover.

NB: The mechanical system is located in the central part of the bodywork.

In the TL1 version, the cover delivers an easy access to the mechanism and the pictograms (option). Two M6 fixing 
screws allow to remove the cover (see picture below). 

2x fixing screw M6 to 

unlock the cover

2x locks with identical 

key to remove the front 

panel 

Fig. 15 Access to the mechanism and electronic board (TL1)

Содержание TriLane TL Series















































Отзывы:

Нет отзывов

Похожие инструкции для TriLane TL Series

Бренды по названию

Популярные бренды

Загрузить еще бренды