The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using it for any purpose other than the use of the
products or the execution of the project to which it refers and from communicating it to third parties without prior written agreement of Automatic Systems. The document is subject to
change without notice.
Smart n' Slim MP-MT-EN
p
25/40
#Configurer M340-MT-FR-00#
3.6.5. Lane management
This page is used to define and manage the lanes you want to monitor.
Scan the network
Automatic detection of the lanes connected to the network in the defined
address range.
Enter the first 3 numbers of the IP address in the first field and enter the
last number (corresponding to the minimum and maximum addresses) in
the second and third fields (the numbers must be between 1 and 254).
This is the range that will be scanned.
The lanes detected are included in the list . By order of the response
time.
Add a lane…
Enter the network IP address of the lane to add it to the list
.
Arrays
List used to select the group of lanes to display in the list and/or to
modify/delete via these functions .
New/Modify/Delete/S
ettings
New: Used to create a new group of lanes.
Modify: Used to modify the name of the group selected in the list
.
Delete: Used to delete the group selected in the list
.
Settings: Used to set the lane position in the group.
Note1
:
All lanes must have a different position in the group.
Note2
:
It is possible to create a free space in the group by leaving a free
position between two lanes. (See example on page “
List
List of the lanes monitored and the group they belong to.
Array
Used to select the group to which the lane will be assigned.
Delete
Used to delete the lane from the selected group.
Pages
Used to go to the next page of the list when the list does not fit on one
page.
5
8
7
6
5
3
3
4
4
5
3
5
2
5
1
1
2
3
4
"From"
(min.
address)
"To"
(max.
address)
5
8
7
6
or
at
choice
