Autodesk AutoCAD Design Suite 2013, Руководство по установке, Страница: 9 / 138

Change Product Language
IMPORTANT This topic does not apply to Autodesk products that provide each
language version on separate media. For these products, you must specify the
product language when purchasing, and cannot change it.
For some Autodesk products, you can select the product language at the time
of installation, using this drop-down menu on the installer:
Language Selection Menu
If the language you want is not on this menu, your available options vary by
Autodesk product. Many products, such as 3ds Max, Inventor, and all
AutoCAD-based products, use language packs to support additional languages.
These conditions apply to language selection:
■ Each suite installation uses a single language. If you need to install one or
more products in a different language, that requires a separate installation.
■ All deployments must be in a single language. One administrative image
can support deployments for different languages, but each deployment is
for one language.
■ If you are installing multiple products and select a language that is not
supported by some products, these products use a default language.
■ After you leave the Product Information page of the installer, the menu
for selecting a language or adding a language pack is disabled. If you later
decide to change the language or add a language pack, you cannot go back
to the Product Information page and use the menu. Instead, you must
cancel the installation, start the installer again, and then make the correct
language selection on the Product Information page.
About Language Packs
A language pack is a software module that can be added to an Autodesk product
to change the language used throughout the user interface and the
documentation. A single instance of the product software can support multiple
languages by adding language packs. Each language pack is matched to a
specific Autodesk product, and includes an installer. You must install the
Installation Overview | 3