Autodesk 64006-051108-9001 - Discreet Cleaner - Mac, Руководство пользователя

Страница: 38 / 292

Chapter 3: Batches 30
Clearing Project Status
If you restart processing on a batch after it was stopped, completed files remain in the batch list
but will not be reprocessed. Cleaner skips any file that has a status of Done or Flattened.
To process a previously encoded file:
1.
Select the file.
2.
Choose Batch > Clear Project Status or press
a
L.
This resets the file status to Ready. The file is encoded again the next time you process a
batch.
Getting Project Status Details
You may want more information about a project status than the single word listed in the Status
column, especially when an error occurs.
To access detailed information about the status of a project:
Double-click the project’s status entry under the Status column.
The status dialog containing details from the batch log file on the last process completed
appears. If the Status column reports an error, the detailed entry report provides information
that may be helpful in diagnosing the problem.
The Batch Log
While Cleaner is processing a batch, it does not show any dialogs or errors it might encounter
so that it can attempt to encode all the files in the list. Information on the batch processing
results, including details on any errors that occurred during encoding, is continuously saved to
the batch file itself. To view this information, you can extract it from the batch by creating a
batch log file.
To extract the encoding batch file:
1.
Open the batch file if it is not currently open.
2.
Choose Batch > Save Batch Log.
3.
Select where to save the log.
Note:
If you process a batch more than once, you must create a new log each time you want
to see the results of the most recently processed batch.